Construction workers have a lot to worry about. They have to make sure the foundations are solid, the framing is level and the walls are plumb. And that’s just the start. Then they worry about the electrician screwing up the wiring, the plumber forgetting to hook up the water, and the insulation guys leaving big gaps in between the walls. It’s enough to make your head spin. But one thing construction workers don’t have to worry about is getting things lifted into place; thanks to hoists.
Types of Hoists Used in Construction
Hoists come in all shapes and sizes, but they all serve the same basic purpose: to lift heavy objects into place. In this article, we’ll take a look at the different types of hoists commonly found in construction sites and their applications.
Chain Hoist
A chain hoist is a simple piece of machinery that’s used to lift heavy objects. It consists of a chain that is wound around a drum, which is attached to a frame. The other end of the chain is attached to a hook, which is used to secure the load.
In construction, chain hoists are used to lift heavy objects such as beams, pipes, and engines. And operators are spoilt for options as they can either operate them manually or electrically. This type of hoist is also favoured because it can be used in small spaces and is relatively cheaper compared to other models. Overall, chain hoists are durable, easy to use and require little maintenance.
Wire Rope Hoists
Like chain hoists, wire rope hoists consist of a length of wire rope that is wrapped around a drum. The other end of the wire rope is attached to the object that needs to be lifted. To operate a wire rope hoist, the operator pulls on the free end of the wire rope. This action causes the drum to turn, which in turn lifts the object.
Wire rope hoists are most often used for lifting heavy objects such as engines and large pieces of machinery. However, they can also be used for lighter loads such as construction materials and smaller pieces of equipment.
Material Hoists
Material hoists are used to lift construction materials such as bricks, mortar, lumber, and concrete from the ground to upper floors or scaffolding during construction projects. These hoists consist of a platform that is raised and lowered using a cable system. The platform is typically large enough to hold several people along with the construction materials being lifted.
To operate a material hoist, the operator uses a control panel to raise and lower the platform as needed. Once the platform reaches the desired height, the operator stops it and cuts off power to prevent it from moving any further. The workers on board then unload the construction materials onto the floor or scaffolding where they’re needed before lowering the platform back down to a ground level so it can be reloaded with more materials.
Conclusion
These are just some examples of the many types of hoists available for different purposes. It’s important that you find one that is specific to your needs to have a successful project.
Fortunately, you don’t have to search far and wide for the perfect hoist – at Conveyer and Hoists Rentals, we have a wide selection available for rent. No matter what your needs are, we have a hoist that’s right for you. So why wait? Contact Conveyer and Hoists Rentals today and let us help you get started on your next project!
